Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Motor and driverDescription: SCHNEIDER ELECTRIC ATV312HU75M3 Variable Speed Drive, Altivar 312 Series, Modbus, CANopen, Three Phase, 7.5kW, 208 to 240VAC3012 -
![]()
Category: Motor and driverDescription: Altistart Soft start ultra miniature, simple and efficient, helps reduce machine wear and maintenance time. Adjustable starting and deceleration time can enhance asynchronous motor performance. Suitable for various applications, including conveyors, pumps, fans, compressors, small cranes, and belt driven machines. This series meets the requirements of IEC/EN 60947-4-2 and has been certified by UL, CSA, CCC, and C-Tick for single or three-phase motor product comparison table - rated current (A) | rated power (kW) | single-phase power supply voltage (V) | three-phase power supply voltage (V) | size (height width depth) (mm) | stock number 3 | 0.37 | 110 to 230V AC | 110 to 480V AC | 100 ´ 22.5 ´ 100 | 381-081 6 | 0.75 | 110 to 230V AC | 110 to 480V AC | 100 ´ 22.5 ´ 10 | 640-0563 9 | 1.1 | 110 to 230V Communication | 110 to 480V AC | 124 ´ 45 ´ 131 | 381-087 12 | 1.5 | 110 to 230V AC | 110 to 480V AC | 124 ´ 45 ´ 131 | 640-0579 Manufacturer | Rated Power | Stock Number --------- | Product Number | (kW) | ATS01N103FT | 0.37 | 381-081 ATS01N106FT | 0.75 | 640-0563 ATS01N109FT | 1.1 | 381-087 ATS01N112FT | 1.5 | 640-0579 # # # Schneider Electric85861+$1417.469910+$1404.583825+$1398.140850+$1391.6977100+$1385.2547150+$1378.8116250+$1372.3686500+$1365.9255 -
![]()
Category: Motor and driverDescription: 50kA @400V The AC short-circuit protection can disconnect/isolate two auxiliary contacts (1 normally open+1 normally closed) with a lockable width of 45mm. The current shown is at 440V voltage. The LUB * * * series power base is non reversible, while the LU2B * * * series is reversible. ###Schneider Electric TeSys U is a modular system used for controlling electric motors; It enables users to develop custom solutions based on a series of standard modules to meet their control requirements. Before selecting the motor protection parameters and control voltage, the plug-in module can be assembled and wired. By replacing plug-in modules, they can be established or changed within seconds. Can be suitable for launching a large number of DOL applications. Faster design speed, fewer required components, faster panel construction speed, shorter assembly time, reduced wire width of 45mm for each starter, maximum 32A (even when used in reverse), allowing for smaller panels to be flexible and upgradable, with plug and play function modules that can determine voltage and protection parameters after assembly and wiring. Broadband electronic control devices provide improved overload protection with fewer components, expandable plug and play diagnostics, and complete coordination to ensure quick recovery of work after short circuit faults. Tesys U model is easy to choose: first choose the power base -12A or 32A, directly start or reverse. The power base includes 2 auxiliary contacts. Then select the plug-in protection module based on the required full load current and control voltage of the motor. Additional plug-in features can be selected and added at any time. The plug-in base can use any LU9 type block. For base options, please refer to stock number 493-877922521+$719.076710+$693.845950+$690.6921100+$687.5382150+$682.4921250+$678.0767500+$673.66131000+$668.6151 -
![]()
Category: Motor and driverDescription: 5.5(Heavy load kW, 7.5 (light load) kW inverter drive, 0.1 → 400Hz, 200 → 240 V AC, IP20, used for 5.5 kW AC motors8119 -
![]()
Category: Motor and driverDescription: Altivar ATV312 The Altivar 312 series drive is a frequency converter used for three-phase asynchronous motors ranging from 200 to 600 V (0.18 to 15 kW). Durable, compact in appearance, and easy to install. Its integrated functionality is particularly suitable for applications that use simple industrial machines. ATV312 has taken into account product settings and usage restrictions during the design phase, providing a reliable and cost-effective solution for simple machine manufacturers and installers. The Altivar 312 driver has six logic inputs, three analog inputs, one logic/analog output, and two relay outputs. The main functions provided are as follows: motor and driver protection for linear, S, U, or customized acceleration and deceleration ramps, local control of reference speed using navigation buttons, 16 preset speed PI regulators, and reference 2-wire/3-wire control for braking sequence, automatic capture of rotating loads, speed detection and automatic restart, fault configuration and stop type configuration, saving driver configuration, multiple functions can be assigned to one logical input Schneider Electric Altivar series4168 -
![]()
Category: Motor and driverDescription: SCHNEIDER ELECTRIC ATS01N222RT Motor Starter, Altistart 01 Series, Torque Limiting, Three Phase, 5.5kW, 22A, 440 to 480VAC36491+$1967.820810+$1949.931525+$1940.986950+$1932.0422100+$1923.0976150+$1914.1530250+$1905.2083500+$1896.2637 -
![]()
Category: Motor and driverDescription: SCHNEIDER ELECTRIC ATS01N209LU Motor Starter, Altistart 01 Series, Torque Limiting, Three Phase, 1.5kW, 9A, 200 to 240VAC94351+$2141.445910+$2121.978225+$2112.244450+$2102.5105100+$2092.7767150+$2083.0428250+$2073.3090500+$2063.5751 -
![]()
Category: Motor and driverDescription: Motor driver 440-480VAC 9A SOFT START ATS0149781+$888.097610+$856.936350+$853.0411100+$849.1460150+$842.9137250+$837.4605500+$832.00721000+$825.7750 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status visible on the front display screen. Error record provided. Models with heat sink and substrate. Note not applicable to 400 V three-phase input. Schneider Electric - Altivar Series26631+$1334.782910+$1322.648525+$1316.581350+$1310.5141100+$1304.4469150+$1298.3797250+$1292.3125500+$1286.2453 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status is visible on the front display screen. Error records are provided for models with heat sinks and substrates. Note: Not suitable for 400V three-phase input. ###Schneider Electric - Altivar Series56811+$2241.208210+$2220.833625+$2210.646350+$2200.4590100+$2190.2717150+$2180.0843250+$2169.8970500+$2159.7097 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status is visible on the front display screen. Error records are provided for models with heat sinks and substrates. Note: Not suitable for 400V three-phase input. ###Schneider Electric - Altivar Series43401+$3260.379110+$3230.739325+$3215.919450+$3201.0995100+$3186.2796150+$3171.4597250+$3156.6398500+$3141.8199 -
![]()
Category: Motor and driverDescription: Altivar ATV312 The Altivar 312 series drive is a frequency converter used for three-phase asynchronous motors ranging from 200 to 600 V (0.18 to 15 kW). Durable, compact in appearance, and easy to install. Its integrated functionality is particularly suitable for applications that use simple industrial machines. ATV312 has taken into account product settings and usage restrictions during the design phase, providing a reliable and cost-effective solution for simple machine manufacturers and installers. The Altivar 312 driver has six logic inputs, three analog inputs, one logic/analog output, and two relay outputs. The main functions provided are as follows: motor and driver protection for linear, S, U, or customized acceleration and deceleration ramps, local control of reference speed using navigation buttons, 16 preset speed PI regulators, and reference 2-wire/3-wire control for braking sequence, automatic capture of rotating loads, speed detection and automatic restart, fault configuration and stop type configuration, saving driver configuration, multiple functions can be assigned to one logical input. Schneider Electric - Altivar series69431+$3473.501910+$3441.924625+$3426.136050+$3410.3473100+$3394.5587150+$3378.7700250+$3362.9814500+$3347.1927 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status visible on the front display screen. Error record provided. Models with heat sink and substrate. Note not applicable to 400 V three-phase input. Schneider Electric - Altivar Series89721+$1383.361110+$1370.785125+$1364.497150+$1358.2091100+$1351.9211150+$1345.6331250+$1339.3451500+$1333.0571 -
![]()
Category: Motor and driverDescription: SCHNEIDER ELECTRIC ATV12H018F1 Variable Speed Drive, Altivar 12 Series, Single Phase, 180W, 100 to 120VAC34461+$1905.964510+$1888.637625+$1879.974150+$1871.3106100+$1862.6471150+$1853.9837250+$1845.3202500+$1836.6567 -
![]()
Category: Motor and driverDescription: SCHNEIDER ELECTRIC ATV312HU15M3 Variable Speed Drive, Altivar 312 Series, Modbus, CANopen, Three Phase, 1.5kW, 208 to 240VAC44931+$4552.299410+$4510.914925+$4490.222650+$4469.5303100+$4448.8381150+$4428.1458250+$4407.4535500+$4386.7612 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status is visible on the front display screen. Error records are provided for models with heat sinks and substrates. Note: Not suitable for 400V three-phase input. ###Schneider Electric - Altivar Series97841+$3489.098810+$3457.379725+$3441.520250+$3425.6606100+$3409.8011150+$3393.9416250+$3378.0820500+$3362.2225 -
![]()
Category: Motor and driverDescription: Altivar ATV12 The Altivar 12 series frequency converter is suitable for single-phase or three-phase power supplies with a rated power of 0.18 kW to 4 kW and three-phase 200-240 V asynchronous motors. Altivar 12 has plug and play installation. Its compact size, integrated functionality, and alternative substrate models make it suitable for applications involving simple machines. Optional configuration: Standard, performance, or fan/pump preset speed flywheel or quick stop S-shaped ramp, U-shaped ramp, or switchable micro motion operation between various ramp shapes. Low load and overload detection logic status is visible on the front display screen. Error records are provided for models with heat sinks and substrates. Note: Not suitable for 400V three-phase input. ###Schneider Electric - Altivar Series96981+$2406.632810+$2384.754325+$2373.815150+$2362.8758100+$2351.9366150+$2340.9974250+$2330.0581500+$2319.1189 -
![]()
Category: Motor and driverDescription: Electric TeSys 24 - 32A 3P Motor Protection Circuit Breaker, 4kA, 690V55241+$1957.388410+$1939.594025+$1930.696750+$1921.7995100+$1912.9023150+$1904.0051250+$1895.1079500+$1886.2106 -
![]()
Category: Motor and driverDescription: Vibration Motor Round Body 5VDC 0.1A 11000r/min47685+$16.580150+$15.8715200+$15.4747500+$15.37551000+$15.27632500+$15.16305000+$15.09217500+$15.0213 -
![]()
Category: Motor and driverDescription: Power Terminal Busbar GV2 For incoming power connections to a GV2 motor circuit breaker ### Schneider Electric TeSys series82081+$84.190410+$80.5299100+$79.8710250+$79.3586500+$78.55331000+$78.18722500+$77.67475000+$77.2355 -
![]()
Category: Motor and driverDescription: 10，Applicable to 3-phase motors. The applicable equipment refers to compatible power supply bases (measured in amperes). ###Schneider Electric TeSys U is a modular system used for controlling electric motors; It enables users to develop custom solutions based on a series of standard modules to meet their control requirements. Before selecting the motor protection parameters and control voltage, the plug-in module can be assembled and wired. By replacing plug-in modules, they can be established or changed within seconds. Can be suitable for launching a large number of DOL applications. Faster design speed, fewer required components, faster panel construction speed, shorter assembly time, reduced wire width of 45mm for each starter, maximum 32A (even when used in reverse), allowing for smaller panels to be flexible and upgradable, with plug and play function modules that can determine voltage and protection parameters after assembly and wiring. Broadband electronic control devices provide improved overload protection with fewer components, expandable plug and play diagnostics, and complete coordination to ensure quick recovery of work after short circuit faults. Tesys U model is easy to choose: first choose the power base -12A or 32A, directly start or reverse. The power base includes 2 auxiliary contacts. Then select the plug-in protection module based on the required full load current and control voltage of the motor. Additional plug-in features can be selected and added at any time. The plug-in base can use any LU9 type block. For base options, please refer to stock number 493-877973451+$918.491210+$886.263450+$882.2349100+$878.2065150+$871.7609250+$866.1211500+$860.48121000+$854.0356 -
![]()
Category: Motor and driverDescription: 10，Applicable to 3-phase motors. The applicable equipment refers to compatible power supply bases (measured in amperes). ###Schneider Electric TeSys U is a modular system used for controlling electric motors; It enables users to develop custom solutions based on a series of standard modules to meet their control requirements. Before selecting the motor protection parameters and control voltage, the plug-in module can be assembled and wired. By replacing plug-in modules, they can be established or changed within seconds. Can be suitable for launching a large number of DOL applications. Faster design speed, fewer required components, faster panel construction speed, shorter assembly time, reduced wire width of 45mm for each starter, maximum 32A (even when used in reverse), allowing for smaller panels to be flexible and upgradable, with plug and play function modules that can determine voltage and protection parameters after assembly and wiring. Broadband electronic control devices provide improved overload protection with fewer components, expandable plug and play diagnostics, and complete coordination to ensure quick recovery of work after short circuit faults. Tesys U model is easy to choose: first choose the power base -12A or 32A, directly start or reverse. The power base includes 2 auxiliary contacts. Then select the plug-in protection module based on the required full load current and control voltage of the motor. Additional plug-in features can be selected and added at any time. The plug-in base can use any LU9 type block. For base options, please refer to stock number 493-877957601+$1151.500910+$1141.032725+$1135.798650+$1130.5645100+$1125.3304150+$1120.0963250+$1114.8622500+$1109.6281 -
![]()
Category: Motor and driverDescription: Advanced control device, 3-phase, Class 20. This device is required for each power base module and can be inserted into the base to select control voltage, motor power, and level. It provides protection testing buttons for motors against overload, short circuit, phase fault, and phase imbalance. Schneider Electric TeSys U TeSys U is a modular system used to control motors; It enables users to develop custom solutions based on a series of standard modules to meet their control requirements. Before selecting the motor protection parameters and control voltage, the plug-in module can be assembled and wired. By replacing plug-in modules, they can be established or changed within seconds. Can be suitable for launching a large number of DOL applications. Faster design speed, fewer required components, faster panel construction speed, shorter assembly time, reduced wire width of 45mm for each starter, maximum 32A (even when used in reverse), allowing for smaller panels to be flexible and upgradable, with plug and play function modules that can determine voltage and protection parameters after assembly and wiring. Broadband electronic control devices provide improved overload protection with fewer components, expandable plug and play diagnostics, and complete coordination to ensure quick recovery of work after short circuit faults. Tesys U model is easy to choose: first choose the power base -12A or 32A, directly start or reverse. The power base includes 2 auxiliary contacts. Then select the plug-in protection module based on the required full load current and control voltage of the motor. Additional plug-in features can be selected and added at any time. The plug-in base can use any LU9 type block. For base options, please refer to stock number 493-877944691+$1252.540310+$1241.153625+$1235.460250+$1229.7668100+$1224.0735150+$1218.3801250+$1212.6867500+$1206.9934 -
![]()
Category: AC motorDescription: AC, DC, and servo motors MOTOR 1/4 HP SINGLE PHASE31611+$2713.387610+$2688.720425+$2676.386950+$2664.0533100+$2651.7197150+$2639.3861250+$2627.0525500+$2614.7190 -
![]()
Category: Motor and driverDescription: Omron R88DKN01HECT AC Servo Drive, 100W, 200VAC, 1.6/0.9A, 50/60Hz3549
